HM122 Portabelt sågverk

5.00 out of 5 based on 79 customer ratings

kr26,900.00 excl. VAT

7 hk Kohler-motor och 22” (55 cm) stockdiameterskapacitet

Woodland Mills konstruerade sågverket HM122 prismedvetna kunder med avsikten att bearbeta sitt eget timmer till en exceptionellt låg kostnad. HM122 är baserad på vår mycket populära HM126-modell och erbjuder hobbysågaren ett lättanvänt och välkonstruerat sågverk med möjlighet att bearbeta stockar upp till 22” (55 cm) i diameter och 10’ 4” (3,1 m) i längd. HM122 medger också obegränsad rälsförlängning för hantering av stockar av valfri längd.

I lager. Lämnar lager inom 3 arbetsdagar.

Motortyp

Clear

Bygg och prissätt

Fri Frakt

2-årsgaranti

Samma Prispolitik

SKU: HM122 Categories: All Products, Portable Sawmills, HM122 Accessories

Tab Container

HM122 Specifikationer

Woodland Mills konstruerade sågverket HM122 prismedvetna kunder med avsikten att bearbeta sitt eget timmer till en exceptionellt låg kostnad. HM122 är baserad på vår mycket populära HM126-modell och erbjuder hobbysågaren ett ekonomiskt och välkonstruerat sågverk. Med pulverlackerad ytbehandling och en 7 hk Kohler-bensinmotor är detta sågverk ett gott val för hobbysågaren.

Kapning

Sågverket klarar av att såga stockar med diametern 22″ (55 cm) och längder upp till 10’ 4” (3,1 m). Rälsförlängningar finns tillgängliga i längder av 6’ 5” (1,95 m). Klarar av att såga till fyrkantsvirke i naturlig form med bredden 16″ (40 cm) eller 18″ (45 cm). Den kan också såga till faner så tunt som 1/16″ (1,6 mm). HM122 sågar inom marginalen 1″ (25 mm) så att du maximerar brädmaterialet.

Effekt

Våra sågverk drivs av en Kohler-4-taktsbensinmotor med 7,0 hk. Den har en lutande cylindrisk utformning med gjutjärnscylinder och överliggande ventil som är lätt att komma åt. Luftfiltreringssystemet Quad-Clean med 4 steg ser till att bara ren luft kommer in, vilket ger maximal effekt och livslängd hos motorn. Dessutom täcks denna motor av en 3-årsgaranti vid yrkesmässigt bruk. Ett centrifugalkopplingssystem är anslutet till motorn, vilket ger “gasa och kör”-effektivitet och lätthanterlighet.

Rälssystem

Såghuvudet på vår maskin löper längs en styv 2,5″ x 2,5″ (6 x 6 cm) L-ränna som stöds på tvären av ett slitstarkt 2 3/8″ x 4 3/4″ (6 x 12 cm) rektangulärt rör. Dessa slitstarka tvärgående stöd ger ytterligare stadga till rälssystemet. Rälsen innehåller också en lättanvänd, justerbar skruvtving som används för att hålla fast stocken under sågningen. Rälsen består av sektioner av längden 6’ 5” (1,95 m) som gör det möjligt att bearbeta stockar av längden 10’ 5” (3,1 m). Rälsförlängningar av längden 6’ 5” (1,95 m) kan hakas på så att man kan ta hand om stockar av valfri längd.

Allmän konstruktion

Alla viktigare stålkomponenter är försedda med antingen pulverlackerad eller galvaniserad ytbehandling. Detta gör att din vedmaskin motstår inverkan av väder och vind. Vi rekommenderar att du täcker över din vedmaskin när den inte används, men om du glömmer är det bra att veta att den klarar sig. Såghuvudet rör sig upp och ner längs en galvaniserad stålkanal med hjälp av ett mycket lättanvänt handdrivet vevsystem. Bladet hålls smörjt med hjälp av ett vattendroppsystem. Detta förhindrar att saven kletar fast på sågbladet.

Blad

HM126 använder sågblad med härdade sågtänder av dimensionerna 1,25″ x 125″ x 0,042″ (32 x 3175 x 1,0 mm) av märket Lenox som finns tillgängliga genom Woodland Mills. Sågspåret begränsas till bara 0,080″ (2 mm) så att man får ut så mycket som möjligt timmer per stock.

Garanti

Sågverket täcks av en 2-årsgaranti mot fabrikationsfel och undantar slitdelar (remmar, sågblad och kullager). Kohler-motorn täcks av en 3-årsgaranti för yrkesmässigt bruk och tas om hand av alla Kohler-försäljningsställen.

Specifikation
Effekt	7,0 hk Kohler Pro Command bensin
Stockdiameterkapacitet	22" (55cm)
Stocklängdskapacitet	10'4" (3,15 m)
Rälsförlängningar	6'5" (1,95 m) (Flera förlängningar kan hakas på)
Avstånd mellan sågbladsskenor	18" (45cm)
Maximalt sågdjup	6" (15cm)
Sågmarginal	1" (2.5cm)
Maximal sågbredd	16" (40 cm) fyrkant eller 18" (45 cm) i naturlig form
Sågmarginal	1" (2.5cm)
Rälsskenkonstruktion	2,5" x 2,5" (63 x 63 mm) galvaniserade stålskenor
Stolpar (rektangulära stålrör)	2,375" x 4,75" (60 x 120 mm) pulverlackerad
Stockklämmor	2 skruvmodeller
Såghuvudkonstruktion	2 stolpar med tvärgående stöd
Drivremshjulets diameter	16" (40cm)
Bladstorlek	Lenox, bredd x längd x tjocklek: 32 x 3175 x 22 mm (1,25" x 125" x 7/8" )
Bladkopplingssystem	Centrifugalkoppling (Gasa och kör)
Smörjningstank	3 L (0,8 US gallons) plast
Ytbehandling	Pulverlackerat / galvaniserat stål
Sågverkets vikt	460 pund (210 kg)
Fraktvikt	500 pund (227 kg)
Sågverksgaranti	2-årsgaranti för delar
Motorgaranti	3-årsgaranti (direkt genom Kohler)

FraktInformation

* Varor i lager levereras till dörren inom 2 till 11 arbetsdagar. Möjlighet till avlastning finns tillgängligt i de flesta områden.

Ungefärliga leveranstider

Vissa bostadsområden kan behöva ytterligare dagar för leverans. Var god ring för prisuppgift och leveranstid till avlägsna orter.

79 reviews for HM122 Portabelt sågverk

John & Geri October 31, 2017

My husband has built a large picnic table, a shooting bench, several toys for our daughter and now he is working on a lean-to tractor shed. He said that the machine has just about paid for itself! He has other lumber cut in store as well. He says thats it makes him so happy to use the wood from our very own trees. I have picked up some scrap wood from his cuts and did some arrows! Thank you for selling us a must have on the homestead:) John and Geri

Location: MI, USA

Nathan Read October 31, 2017

Here is a couple of pictures from earlier today. I got this pine out of the way for my blueberries I plan to plant. The lumber it produces will go to build a neighbor's chicken coop.

Location: AL, USA

Nathan Read October 31, 2017

Here are pictures from earlier today. I got this pine out of the way for my blueberries I plan to plant. The lumber it produces will go to build a neighbor's chicken coop.

Location: AL, USA

Tony Parker October 31, 2017

I love my mill!!

Location: TN, USA

Bryan Cooper October 31, 2017

Melissa, I am loving my 722 from Woodland Mills. I have sawn poplar 2x's for my brother to help him finish framing his barn. Currently I am working on replacing the railings around my porch. As you can see from the pictures, I am using cedar for the framing and have incorporated laser cut metal panel inserts that have been custom cut for the project. I really appreciate the customer service I have received with Woodland Mills. It is something of a rarity these days. I spent around 2 years researching sawmills before purchasing the 722 and I must say, it has met and even exceeded my expectations. I would and have already recommended Woodland Mills to anyone who has inquired. Thanks, Bryan Cooper

Location: AL, USA

Steve Meunier October 31, 2017

Good day folks, I got the mill up and running on the weekend. It is amazing. I attached a photo. Take good care. Update: I absolutely love my sawmill. I have been working on a project for our cottage and milled pretty much all the lumber for it. I set it up a bit higher as most of the work is done at knee level for that exact reason, to be easier on the back. I have a small electric crane/winch to lift the really heavy logs up onto the mill. I am making board and batten for the cottage and also lumber for a lean to against our garage. I will send pics when I am done. Steve Hi Lori, Well I milled up some black ash and made some charcuterie boards this weekend. I got a taste of changing out my first blade as well this weekend. Unbeknownst to me there were a couple of nails in the tree and the tree had grown over top of them. It didn’t destroy the blade but it dulled it pretty good. I put the new blade on and did some trial and error with the adjustment bolt on the left fly wheel until the blade stopped tracking and rubbing on the blade guides and turned freely. Re torqued the blade and I was off to the races. Here are a few pic of the boards sanded and finished

Location: Ontario, Canada

Logan Blakney October 31, 2017

Hello Lori, So far I am really enjoying my woodland mills sawmill and the customer service from you and your team has been excellent. I have used it to resaw some oak beams in Alberta and have since transported it to our cabin in the BC interior to mill some lumber. Thank you, Logan Blakney

Location: AB, Canada

Jarrid Dorsey October 31, 2017

Love my HM122 and the custom lumber you can make with it! Been cutting cedar fireplace mantles and am cutting some new decking. Great mill, runs like a clock and is easy to use. Jarrid

Location: BC, Canada

Brian Clarke October 31, 2017

I love my saw mill, I just finished cutting a large spruce to make log slab furniture, used it to cut lumber to frame a quick shelter over my saw mill and build a drying rack, thank you very much. Heres a bench I just finished for my friends wedding. They had all the guests sign it and then lacquered it, this pic is just before I delivered it to them. The bench was made of was a 157 year old Ash tree that blew over, complete with worm holes for character lol.

Location: AB, Canada

Raymond Bramlett October 31, 2017

I just completed a 1 week milling project at my cabin in the Upper Peninsula of Michigan. We milled up 60 posts and beams ranging in size from 6x6x8' to 6x10x16'. Raymond

Location: CO, USA

John & Geri October 31, 2017

My husband has built a large picnic table, a shooting bench, several toys for our daughter and now he is working on a lean-to tractor shed. He said that the machine has just about paid for itself! He has other lumber cut in store as well. He says thats it makes him so happy to use the wood from our very own trees. I have picked up some scrap wood from his cuts and did some arrows! Thank you for selling us a must have on the homestead:) John and Geri

Location: MI, USA
Nathan Read October 31, 2017

Here is a couple of pictures from earlier today. I got this pine out of the way for my blueberries I plan to plant. The lumber it produces will go to build a neighbor's chicken coop.

Location: AL, USA
Nathan Read October 31, 2017

Here are pictures from earlier today. I got this pine out of the way for my blueberries I plan to plant. The lumber it produces will go to build a neighbor's chicken coop.

Location: AL, USA
Tony Parker October 31, 2017

I love my mill!!

Location: TN, USA
Bryan Cooper October 31, 2017

Melissa, I am loving my 722 from Woodland Mills. I have sawn poplar 2x's for my brother to help him finish framing his barn. Currently I am working on replacing the railings around my porch. As you can see from the pictures, I am using cedar for the framing and have incorporated laser cut metal panel inserts that have been custom cut for the project. I really appreciate the customer service I have received with Woodland Mills. It is something of a rarity these days. I spent around 2 years researching sawmills before purchasing the 722 and I must say, it has met and even exceeded my expectations. I would and have already recommended Woodland Mills to anyone who has inquired. Thanks, Bryan Cooper

Location: AL, USA
Steve Meunier October 31, 2017

Good day folks, I got the mill up and running on the weekend. It is amazing. I attached a photo. Take good care. Update: I absolutely love my sawmill. I have been working on a project for our cottage and milled pretty much all the lumber for it. I set it up a bit higher as most of the work is done at knee level for that exact reason, to be easier on the back. I have a small electric crane/winch to lift the really heavy logs up onto the mill. I am making board and batten for the cottage and also lumber for a lean to against our garage. I will send pics when I am done. Steve Hi Lori, Well I milled up some black ash and made some charcuterie boards this weekend. I got a taste of changing out my first blade as well this weekend. Unbeknownst to me there were a couple of nails in the tree and the tree had grown over top of them. It didn’t destroy the blade but it dulled it pretty good. I put the new blade on and did some trial and error with the adjustment bolt on the left fly wheel until the blade stopped tracking and rubbing on the blade guides and turned freely. Re torqued the blade and I was off to the races. Here are a few pic of the boards sanded and finished

Location: Ontario, Canada
Logan Blakney October 31, 2017

Hello Lori, So far I am really enjoying my woodland mills sawmill and the customer service from you and your team has been excellent. I have used it to resaw some oak beams in Alberta and have since transported it to our cabin in the BC interior to mill some lumber. Thank you, Logan Blakney

Location: AB, Canada
Jarrid Dorsey October 31, 2017

Love my HM122 and the custom lumber you can make with it! Been cutting cedar fireplace mantles and am cutting some new decking. Great mill, runs like a clock and is easy to use. Jarrid

Location: BC, Canada
Brian Clarke October 31, 2017

I love my saw mill, I just finished cutting a large spruce to make log slab furniture, used it to cut lumber to frame a quick shelter over my saw mill and build a drying rack, thank you very much. Heres a bench I just finished for my friends wedding. They had all the guests sign it and then lacquered it, this pic is just before I delivered it to them. The bench was made of was a 157 year old Ash tree that blew over, complete with worm holes for character lol.

Location: AB, Canada
Raymond Bramlett October 31, 2017

I just completed a 1 week milling project at my cabin in the Upper Peninsula of Michigan. We milled up 60 posts and beams ranging in size from 6x6x8' to 6x10x16'. Raymond

Location: CO, USA

Click here to load more...