Stubbfräsen WG24

0.00 out of 5 based on 44 customer ratings

kr23,900.00 excl. VAT

Woodland Mills WG24 Stubbfräs ansluts direkt till traktorns trepunktslänkage och den är utrustad med ett stort svänghjul av rent stål med diametern 24″ (61cm) för slipning och 34 hårdmetallsågtänder, vilket gör att borttagningen av trädstubbar går som en dans! Dessa extremt slitstarka stubbfräsar har konstruerats för att fungera optimalt när man kopplar ihop med ett 20-45 hk kraftuttag (PTO), och man kan lätt mala sönder upp till 6″ (15 cm) under markytan så att rötterna avlägsnas och marken kan förberedas för anläggning av gräsmatta eller andra markarbeten.

I lager. Lämnar lager inom 3 arbetsdagar.

Bygg och prissätt

Fri Frakt

2-årsgaranti

Samma Prispolitik

SKU: WG24 Categories: All Products, Stump Grinder, WG24 Accessories

Tab Container

Woodland Mills WG24 Stubbfräs kopplas direkt till din traktors trepunktslänkage och drivs från kraftuttaget (PTO). Det stora skärande svänghjulet av rent stål är försett med 34 sågtänder av volframkarbid och har diametern 61 cm (24 tum) och tjockleken 19 mm (3/4 tum). Utformad för traktorer med en uteffekt från kraftuttaget i intervallet 15 till 34 kW (20 till 45 hk). Det går nu att få bort stubbar på dina ägor med hjälp av WG24 Stubbfräs. Den mal sönder upp till 15 cm (6 tum) under markytan så att rötterna avlägsnas och marken kan förberedas för anläggning av gräsmatta eller andra markarbeten. Stubbfräsen är också försedd med en upphängningsanordning för motorsåg för att underlätta förflyttning inom området. Dessutom har stubbfräsen snabbfäste vilket gör att det går lätt och snabbt att koppla upp den till traktorer som har mottagare för snabbfäste.

Traktorkrav

Stubbfräsen WG24 har konstruerats för att användas tillsammans med traktorer med kraftöverföringsaxel. Stubbfräsen fungerar bäst för traktorer där kraftöverföringsaxeln styrs oberoende av traktorns drivsystem. Detta för det möjligt för operatören att reglera traktorns hastighet oberoende av kraftuttagets. Eftersom traktorn drar stubbfräsen genom stubben är det viktigt hur snabbt traktorn rör sig och denna hastighet bör vara oberoende av kraftuttagets. Stubbfräsen WG24 ska köras med rotationshastigheten 540 varv/min.

Kraftöverföringsaxel

I stubbfräsen WG24 ingår en kraftöverföringsaxel av slirkopplingstyp.

Specifikation
Svänghjulets diameter	24 ″/610 mm
Svänghjulets tjocklek	3/4″/19 mm
Kraftuttagets effektbehov i hk	20 – 45
Montering	Koppling – Trepunktslänkage enligt kategori 1 (med möjlighet till snabbfäste)
Kraftöverföringstapp	540 varv/min
Vikt	432 pund / 196 kg
Dimensioner	29” x 37” x 38” / 737 x 940 x 965 mm
Kraftöverföringsaxel	Ingår

FraktInformation

* De flesta order kan levereras till dörren till en bostads- eller affärsadress. Möjlighet till avlastning finns tillgängligt i de flesta områden. Om du vill veta om ditt områden har möjlighet till levereras till dörren eller avlastning kan du ringa oss på nummer +46-31-210370. Varor i lager skickas vanligtvis från lagret inom 2 till 3 arbetsdagar och transporten varierar mellan 3 och 10 dagar. Så snart din order har avsänts får du ett spårningsnummer, så att du kan se leveransdagen på ett noggrannare sätt.

Ungefärliga leveranstider

Vissa bostadsområden kan behöva ytterligare dagar för leverans. Var god ring för prisuppgift och leveranstid till avlägsna orter.

44 reviews for Stubbfräsen WG24

Robert Mireault October 31, 2017

Hi Lori I couldn't be happier with the stump grinder. It's everything I hoped it would be. So far I have grinded over 40 trees on my property ranging in diameter from 6" to 38". I had a long row of silver willows that I wanted to get rid of and this did the job perfectly I set it up on my Kabota BX2360. It worked hard but worked great.

Location: MB, Canada

Gerard Franco October 31, 2017

Hi Lori, I do have a lot of work for the grinder and it works really well. I'm very happy.Those are called Arika palms they grow into clumps of multiple trees and when they seed they will sprout the seeds also and spread out even wider. They are very soft and very fibrous and hold lots of moisture. When i'm grind this type of tree stump I have to climb off the tractor about five time to rake the mulch away so i can see whats left of the stump. Its like raking wet concrete. I also do Coconut palms they are very soft and not quite as fibrous with cocos you get more of a powder mulch. Aloha, Gerard

Location: Hawaii, USA

John Mitchell October 31, 2017

I have removed several stumps and have had no problems with the grinder, Thanks

Location: MO, USA

Dai Chuong October 31, 2017

This is one beefy stump grinder! I was able to easily grind over 20 decent sized eucalyptus stumps over a span of 2 days. A worthwhile investment and I'm glad I got this instead of hiring people to do since I can grind the stumps at my own pace.

Location: CA, USA

Don Laux October 31, 2017

Lori , here is a photo of my new Woodland Mills stump grinder. I had approximately 20 stumps 36” to 42” in diameter, it did the job… thanks “Happy Customer”.

Location: TN, USA

Timothy Scheurs October 31, 2017

Bought your WG24 stump grinder a few months back. Used it now on some 20 plus stumps, mostly oak and hickory stumps, up to 30" in diameter. Has worked great, and has proven to work as advertised. Runnig it on a JD3039R with no issues in performance. Nice product!

Location: IA, USA

Bruce Weir October 31, 2017

In the foreground is the remains of an apple stump. I have used your stump grinder on 8 hardwood stumps, maple, ash, birch, in sizes up to 2.5 Ft diameter. It certainly does the job and I am very pleased with it.

Location: QC Canada

Paul Correll October 31, 2017

Purchased the WG24 stump grinder and extremely satisfied with its performance. I wish I purchased it years ago. Using it on my Kubota B3200 and even though its a smaller tractor it works perfectly. Ordered on a Friday and arrived in 6 days ... very nicely shipped and actually used the steel shipping crate and made a work bench out of it (nice bonus). Grinds stumps much faster than expected and the build quality is outstanding. The only drawback is now every neighbor has a stump to remove but now I'm invited to all the cookouts. Well worth the money... Thanks!

Location: NC, USA

Daniel Reed October 31, 2017

Hi Lori, Here are some before and after pictures of my back yard. I have chewed up hundreds of stumps on my property to date without a single problem. The transformation was accomplished with a chainsaw and the WM24 Stump Grinder on a 25 HP Compact tractor. (and maybe a little hard work and a few fires.) I highly recommend the Stump Grinder. It's a great attachment.

Location: WI, USA

Carter Ferguson October 31, 2017

My name is Carter Ferguson and I would highly recommend the Woodland Mills stump grinder. If you have any stumps don't pay the high prices that big companies charge, buy one and you can do it on your own and even make a few bucks on the side. ( I do in the Lombardi ON area) The stump grinder is easy to hook up and easy to run.

Location: Ontario, Canada

Robert Mireault October 31, 2017

Hi Lori I couldn't be happier with the stump grinder. It's everything I hoped it would be. So far I have grinded over 40 trees on my property ranging in diameter from 6" to 38". I had a long row of silver willows that I wanted to get rid of and this did the job perfectly I set it up on my Kabota BX2360. It worked hard but worked great.

Location: MB, Canada
Gerard Franco October 31, 2017

Hi Lori, I do have a lot of work for the grinder and it works really well. I'm very happy.Those are called Arika palms they grow into clumps of multiple trees and when they seed they will sprout the seeds also and spread out even wider. They are very soft and very fibrous and hold lots of moisture. When i'm grind this type of tree stump I have to climb off the tractor about five time to rake the mulch away so i can see whats left of the stump. Its like raking wet concrete. I also do Coconut palms they are very soft and not quite as fibrous with cocos you get more of a powder mulch. Aloha, Gerard

Location: Hawaii, USA
John Mitchell October 31, 2017

I have removed several stumps and have had no problems with the grinder, Thanks

Location: MO, USA
Dai Chuong October 31, 2017

This is one beefy stump grinder! I was able to easily grind over 20 decent sized eucalyptus stumps over a span of 2 days. A worthwhile investment and I'm glad I got this instead of hiring people to do since I can grind the stumps at my own pace.

Location: CA, USA
Don Laux October 31, 2017

Lori , here is a photo of my new Woodland Mills stump grinder. I had approximately 20 stumps 36” to 42” in diameter, it did the job… thanks “Happy Customer”.

Location: TN, USA
Timothy Scheurs October 31, 2017

Bought your WG24 stump grinder a few months back. Used it now on some 20 plus stumps, mostly oak and hickory stumps, up to 30" in diameter. Has worked great, and has proven to work as advertised. Runnig it on a JD3039R with no issues in performance. Nice product!

Location: IA, USA
Bruce Weir October 31, 2017

In the foreground is the remains of an apple stump. I have used your stump grinder on 8 hardwood stumps, maple, ash, birch, in sizes up to 2.5 Ft diameter. It certainly does the job and I am very pleased with it.

Location: QC Canada
Paul Correll October 31, 2017

Purchased the WG24 stump grinder and extremely satisfied with its performance. I wish I purchased it years ago. Using it on my Kubota B3200 and even though its a smaller tractor it works perfectly. Ordered on a Friday and arrived in 6 days ... very nicely shipped and actually used the steel shipping crate and made a work bench out of it (nice bonus). Grinds stumps much faster than expected and the build quality is outstanding. The only drawback is now every neighbor has a stump to remove but now I'm invited to all the cookouts. Well worth the money... Thanks!

Location: NC, USA
Daniel Reed October 31, 2017

Hi Lori, Here are some before and after pictures of my back yard. I have chewed up hundreds of stumps on my property to date without a single problem. The transformation was accomplished with a chainsaw and the WM24 Stump Grinder on a 25 HP Compact tractor. (and maybe a little hard work and a few fires.) I highly recommend the Stump Grinder. It's a great attachment.

Location: WI, USA
Carter Ferguson October 31, 2017

My name is Carter Ferguson and I would highly recommend the Woodland Mills stump grinder. If you have any stumps don't pay the high prices that big companies charge, buy one and you can do it on your own and even make a few bucks on the side. ( I do in the Lombardi ON area) The stump grinder is easy to hook up and easy to run.

Location: Ontario, Canada

Click here to load more...